{}

Our Brands

Impact-Company-Logo-English Black-01-177x54

Welcome to the Schneider Electric Website

Welcome to our website.

What is the rated Short-Circuit Making Capacity (Icm) value for Compact NS...

The rated Short-Circuit Making Capacity (Icm) for Compact NS Moulded Case Circuit Breaker is as per the table attached and is dependent on the Short-Circuit Breaking Capacity (Icu). (Note: Table is...

What is the thickness of the Steel sheet metal used in Okken switchboard.

The Steel sheet metal thickness used in Okken switchboard is as listed below: Okken Steel sheet metal thickness Housing Thickness mm Door 2.00mm Rear panels 1.50mm Side panels 1.50mm Roof 1.50mm...

What is the material composition of the Main Bus Bar of the Masterpact ACB?

The material composition used in the Main Bus Bar of the Masterpact Air Circuit breaker (ACB) is shown in the table attached. Note: AL/Sn5 means Aluminum connector with Sn5 coated

What is the lithium battery life expectancy in a XBTGT or XBTGK.

Lithium battery's life expectancy for the XBTGT and XBTGK is: 10 years when the battery's ambient temperature is less than or equal to 40 deg C (104 deg F) 10 years when the unit's...

What is the accuracy of the Premium PLC CPU real time clock.

Real time clock accuracy: Accuracy of the real time clock is one second (%SW50) +/- 200ms. Resolution of the real time clock is one second (%SW50) +/- 200ms,because 200ms is the refresh rate of the...

What is the short circuit current rating for TeSys GV2G Comb Busbar.

The short-circuit current withstand rating (KA) of Tesys Comb Busbar is compatible with the breaking capacity of Motor Protection Circuit Breakers (MPCB) of GV series. The GV Series Comb Busbar does...

What is the difference between ModSoft PID function and Concept PID...

The difference between ModSoft PID and Concept PID loops are as follows: PID (ModSoft): PB - Gain = 100 / PB I - Integral Coefficient Expressed as Repeats/Minute. The higher the value, the greater...

What is the meaning of elapsed time and power on time in the fault history...

In fault history the elapsed time refers to [Run time] (rtH). This parameter provides the total duration of time, the motor has been switched on. Power on time refers to (PtH) and this parameter...

Learn more through our Generic Knowledge FAQsGeneral Knowledge

Where is SEVN's warehouse?

South: DT 743, 1B Hamlet, Thuận An, Bình Dương North:ICD Tiên Sơn, TS9 street, huyện Tiên Du, Bắc Ninh