input interface module - 9.5 mm - electromechanical - 24 V DC - 1 C/O low-levelShow more characteristics >
Add to My Products Remove from My Products
Main range of productInterface for discrete signals product or component typeSlim electromechanical input interface module product specific applicationFor very low level switching contacts type and composition1 C/O [Uc] control circuit voltage24 V control circuit typeDC width pitch dimension17.5 mm [In] rated current<= 0.023 A reverse polarity protectionInternal for control circuit short-circuit protection0.4 A external fuse fast blow [Ith] conventional free air thermal current0.05 A conforming to IEC 60947-1 local signalling1 LED indicating control signal state Complementary control circuit voltage limits28.8 V connections - terminalsScrew clamp terminal operating threshold16.9 V drop-out voltage<= 3.8 V holding current2 mA power dissipation in W0.55 W maximum switching voltage60 V AC60 V DC [Ue] rated operational voltage<= 48 V AC conforming to IEC 60947-5-1 for built-in contacts<= 48 V DC conforming to IEC 60947-5-1 for built-in contacts network frequency50/60 Hz minimum switching current0.01 mA minimum switching voltage0.01 V electrical reliability1e-008 operating time<= 6 ms between de-energisation of coil and closing of NC contact<= 6 ms between de-energisation of coil and closing of NO contact DC<= 6 ms between energisation of coil and closing of NC contact<= 6 ms between energisation of coil and closing of NO contact DC contact bounce time<= 2 ms non-overlap time2 ms on de-energisation5 ms on energisation operating rate in Hz10 Hz at no-load mechanical durability>= 20000000 cycles [Ui] rated insulation voltage250 V conforming to VDE 0110 group C300 V conforming to IEC 60947-1 flame retardanceV0 conforming to UL 94 cable cross section0.27...4 mm², 1 wire rigid0.34...2.5 mm², 1 or 2 wires flexible with cable end0.6...2.5 mm², 1 or 2 wires flexible without cable end operating positionAny position installation categoryII conforming to IEC 60947-1 mounting supportAsymmetrical DIN railCombination railSymmetrical DIN rail product weight0.048 kg Environment immunity to microbreaks1 ms dielectric strength1000 V between open contacts1500 V between coil circuit and contact circuits2500 V between wired interface and earth standardsIEC 60947-5-1 product certificationsBVCSADNVLROS (Lloyds register of shipping)UL IP degree of protectionIP20 conforming to IEC 60529 protective treatmentTC fire resistance960 °C conforming to IEC 60695-2-1 shock resistance30 gn for 11 ms conforming to IEC 60068-2-27 vibration resistance3 gn (f = 10...150 Hz) conforming to IEC 60068-2-6 electromagnetic compatibility1.2/50 µs shock waves immunity test, 0.5 kV for U < 50 V conforming to IEC 947-11.2/50 µs shock waves immunity test, 1.5 kV for U < 150 V conforming to IEC 947-11.2/50 µs shock waves immunity test, 2.5 kV for U < 300 V conforming to IEC 947-1Electromagnetic field immunity test level 3, 10 V/m between 27...1000 MHz conforming to IEC 61000-4-3Electrostatic discharge immunity test level 3, 8 kV conforming to IEC 61000-4-2Rapid transients immunity test level 3, on input/output 1 kV conforming to IEC 61000-4-4Rapid transients immunity test level 3, on power supply 2 kV conforming to IEC 61000-4-4 ambient air temperature for operation-5...40 °C unrestricted operation-25...70 °C at Us-5...55 °C from 0.85...1.1 Us ambient air temperature for storage-40...80 °C operating altitude<= 3000 m pollution degree2 conforming to IEC 60947-1 Contractual warranty Warranty period18 months
Documents & DownloadsLanguage
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsSlim Electromechanical Interface ModuleDimensions
Connections and SchemaSlim Electromechanical Interface ModuleExample of Application with PLC
Interfacing PLC discrete inputsS1Pushbuttons series contacts(1)Processing power supply(2)PLC positive logic discrete inputs(3)Process power supply(4)2-wire sensors(5)3-wire sensorsSlim Electromechanical Interface ModuleCircuit Diagram